Cytotoxic effect of dental luting cement on human gingival mesenchymal stem cell and evaluation of cytokines and growth factor release - An in vitro study.

AIM: In routine dental care, various dental luting cements are utilized to cement the dental prosthesis. Thus, the aim of the current study was to assess the Cytotoxic effect of three different dental luting cements on human gingival mesenchymal stem cell and evaluation of cytokines and growth factors release. SETTINGS AND DESIGN: Cytotoxicity of glass ionomer cement (GIC), resin modified glass ionomer cement (RMGIC) and resin cement (RC) on the human gingival mesenchymal stem cells (HGMSCs) was evaluated. Amongst the cements tested, least cytotoxic cement was further tested for the release of cytokines and growth factors. MATERIALS AND METHODS: MTT test was used to evaluate the cytotoxicity of the dental luting cements at 1 h, 24 h, and 48 h on HGMSCs. Cytokines such as interleukin (IL) 1α & IL 8 and growth factors such as platelet derived growth factor & transforming growth factor beta release from the least cytotoxic RC was evaluated using flow cytometry analysis. STATISTICAL ANALYSIS USED: The mean absorbance values by MTT assay and cell viability at various time intervals between four groups were compared using a one way analysis of variance test and Tukey's post hoc test. The least cytotoxic RC group and the control group's mean levels of cytokines and growth factors were compared using the Mann-Whitney test. RESULT: As exposure time increased, the dental luting cement examined in this study were cytotoxic. RC was the least cytotoxic, RMGIC was moderate and glass ionomer cement showed the highest cytotoxic effect. Concomitantly, a significant positive biological response of gingival mesenchymal stem cells with the release of ILs when exposed to the RC was observed. CONCLUSION: For a fixed dental prosthesis to be clinically successful over the long term, it is imperative that the biocompatibility of the luting cement be taken into account in order to maintain a healthy periodontium surrounding the restoration.

Enhanced remineralisation ability and antibacterial properties of sol-gel glass ionomer cement modified by fluoride containing strontium-based bioactive glass or strontium-containing fluorapatite.

OBJECTIVES: This study aimed to compare two types of bioactive additives which were strontium-containing fluorinated bioactive glass (SrBGF) or strontium-containing fluorapatite (SrFA) added to sol-gel derived glass ionomer cement (SGIC). The objective was to develop antibacterial and mineralisation properties, using bioactive additives, to minimize the occurrence of caries lesions in caries disease. METHODS: Synthesized SrBGF and SrFA nanoparticles were added to SGIC at 1 wt% concentration to improve antibacterial properties against S. mutans, promote remineralisation, and hASCs and hDPSCs viability. Surface roughness and ion-releasing behavior were also evaluated to clarify the effect on the materials. Antibacterial activity was measured via agar disc diffusion and bacterial adhesion. Remineralisation ability was assessed by applying the material to demineralised teeth and subjecting them to a 14-day pH cycle, followed by microCT and SEM-EDS analysis. RESULTS: The addition of SrFA into SGIC significantly improved its antibacterial property. SGIC modified with either SrBGF or SrFA additives could similarly induce apatite crystal precipitation onto demineralised dentin and increase dentin density, indicating its ability to remineralise dentin. Moreover, this study also showed that SGIC modified with SrBGF or SrFA additives had promising results on the in vitro cytotoxicity of hASC and hDPSC. SIGNIFICANT: SrFA has superior antibacterial property as compared to SrBGF while demonstrating equal remineralisation ability. Furthermore, the modified SGIC showed promising results in reducing the cytotoxicity of hASCs and hDPSCs, indicating its potential for managing caries.

Bioactivity and remineralization potential of modified glass ionomer cement: A systematic review of the impact of calcium and phosphate ion release.

This systematic review investigates the effectiveness of calcium and phosphate ions release on the bioactivity and remineralization potential of glass ionomer cement (GIC). Electronic databases, including PubMed-MEDLINE, Scopus, and Web of Science, were systematically searched according to PRISMA guidelines. This review was registered in the PROSPERO database. Five eligible studies on modifying GIC with calcium and phosphate ions were included. The risk of bias was assessed using the RoBDEMAT tool. The incorporation of these ions into GIC enhanced its bioactivity and remineralization properties. It promoted hydroxyapatite formation, which is crucial for remineralization, increased pH and inhibited cariogenic bacteria growth. This finding has implications for the development of more effective dental materials. This can contribute to improved oral health outcomes and the management of dental caries, addressing a prevalent and costly oral health issue. Nevertheless, comprehensive longitudinal investigations are needed to evaluate the clinical efficacy of this GIC's modification.

Effect of a calcium silicate cement and experimental glass ionomer cements containing calcium orthophosphate particles on demineralized dentin.

OBJECTIVE: The study aims to evaluate the effect of a glass ionomer cement (GIC; Fuji 9 Gold Label, GC) with added calcium orthophosphate particles and a calcium silicate cement (CSC; Biodentine, Septodont) regarding ion release, degradation in water, mineral content, and mechanical properties of demineralized dentin samples. METHODS: GIC, GIC + 5% DCPD (dicalcium phosphate dihydrate), GIC + 15% DCPD, GIC + 5% ß-TCP (tricalcium phosphate), GIC + 15% ß-TCP (by mass), and CSC were evaluated for Ca2+/Sr2+/F- release in water for 56 days. Cement mass loss was evaluated after 7-day immersion in water. Partially demineralized dentin disks were kept in contact with materials while immersed in simulated body fluid (SBF) at 37 °C for 56 days. The "mineral-to-matrix ratio" (MMR) was determined by ATR-FTIR spectroscopy. Dentin hardness and elastic modulus were obtained by nanoindentation. Samples were observed under scanning and transmission electron microscopy. Data were analyzed by ANOVA/Tukey test (α = 0.05). RESULTS: Ca2+ release from CSC and GIC (µg/cm2) were 4737.0 ± 735.9 and 13.6 ± 1.6, respectively. In relation to the unmodified GIC, the addition of DCPD or ß-TCP increased ion release (p < 0.001). Only the dentin disks in contact with CSC presented higher MMR (p < 0.05) and mechanical properties than those restored with a resin composite used as control (p < 0.05). Mass loss was similar for GIC and CSC; however, the addition of DCPD or ß-TCP increased GIC degradation (p < 0.05). CONCLUSION: Despite the increase in ion release, the additional Ca2+ sources did not impart remineralizing capability to GIC. Both unmodified GIC and CSC showed similar degradation in water. CLINICAL RELEVANCE: CSC was able to promote dentin remineralization.

Glass ionomer cement with calcium-releasing particles: Effect on dentin mineral content and mechanical properties.

OBJECTIVE: to evaluate the effect a glass ionomer cement (GIC) containing hydroxyapatite (HAp) or calcium silicate (CaSi) particles on mineral content and mechanical properties of demineralized dentin. Ion release and compressive strength (CS) of the cements were also evaluated. METHODS: GIC (Fuji 9 Gold Label, GC), GIC+ 5%HAp and GIC+ 5%CaSi (by mass) were evaluated. Ion release was determined by induced coupled plasma optical emission spectroscopy (Ca2+/Sr2+) or ion-specific electrode (F-) (n = 3). A composite (Filtek Z250, 3 M ESPE) was used as control in remineralization tests. Demineralized dentin discs were kept in contact with materials in simulated body fluid (SBF) at 37 °C for eight weeks. Mineral:matrix ratio (MMR) was determined by ATR-FTIR spectroscopy (n = 5). Dentin hardness (H) and elastic modulus (E) were determined by nanoindentation (n = 10). CS was tested after 24 h and 7d in deionized water (n = 12). Data were analyzed by ANOVA/Tukey test (α = 0.05). RESULTS: Ca2+ and Sr2+ release was higher for the modified materials (p < 0.05). Only GIC+ 5%HAp showed higher F- release than the control (p < 0.05). All groups showed statistically significant increases in MMR, with no differences among them after 8 weeks (p > 0.05). No differences in dentin H or E were observed among groups (p > 0.05). HAp-modified GIC showed increased initial CS, while adding CaSi had the opposite effect (p < 0.05). After 7 days, GIC+ 5%CaSi presented lower CS in relation to control and GIC+ 5%HAp (p < 0.05). SIGNIFICANCE: GIC modification with HAp or CaSi affected CS and increased ion release; however, none of the groups showed evidence of dentin remineralization in comparison to the negative control.

The effect of adhesive resin cement, obturation material and root dentin location on the retention of glass fiber-reinforced composite resin posts.

PURPOSE: To assess the effects of adhesive resin cement, obturation material and dentin location on the retention of glass fiber-reinforced resin composite (FRRC) posts. METHODS: 60 root canals in single rooted teeth were obturated with three different protocols (n= 20), including no obturation material (Control), GuttaFlow and Gutta-percha. Spaces were prepared for glass (FRCR) posts. Subgroups of the roots (n=10) were allocated for receiving posts luted with RelyX Unicem or Calibra resin cements. The specimens were mounted in plastic molds using epoxy resin. They were sectioned transversely to obtain three 1 mm-thick coronal, middle and apical slabs. Post retention was measured using a universal testing machine. The push-out test was performed at a crosshead speed of 0.5 mm/minute until post dislodgement occurred. Dislodged posts were examined microscopically to evaluate the mode of failure. Data were analyzed using univariate tests to reveal the effects of dependent variables and their interactions on post retention. Tukey test was used to determine significant differences for post retention in obturation material and dentin location groups. P-values ≤ 0.05 were considered significant. RESULTS: The adhesive resin cement, obturation material, dentin location and cement obturation materials interaction affected post retention. The mean bond strength was higher for posts cemented with RelyX Unicem than for those cemented with Calibra resin cements. Post retention in coronal locations was significantly superior to middle or apical locations. The failure mode was primarily mixed. CLINICAL SIGNIFICANCE: When using RelyX Unicem cement for luting glass fiber-reinforced root canal posts, complete removal of all obturation materials from the post space significantly improves the retention. Although Calibra cement is less technique sensitive than RelyX Unicem resin cement, it produces notably lower retention of fiber-reinforced glass root canal posts.

Evaluation of compressive strength, surface microhardness, solubility and antimicrobial effect of glass ionomer dental cement reinforced with silver doped carbon nanotube fillers.

BACKGROUND: Conventional glass ionomer cements (GICs) are currently the most widely used dental cements due to their chemical bonding into tooth structure, release of fluoride, and ease of manipulation and usage. One of their drawbacks is their low mechanical properties and high solubility. Carbon nanotubes (CNTs) could be utilized in dentistry due to their several potential applications. CNTs can be used as fillers to reinforce polymers or other materials. Additionally, silver (Ag) nanoparticles are highly effective at preventing dental biofilm and enhancing mechanical properties. OBJECTIVES: The aim of the present in vitro study is to evaluate the compressive strength, surface microhardness, solubility, and antimicrobial effect of the conventional GIC reinforced with manual blending of 0.01 wt.% Ag doped CNT fillers. METHODS: The control group was prepared by mixing dental GIC powder with their liquid. The innovatively reinforced dental GIC group was prepared by incorporating 0.01 wt.% Ag doped CNT fillers into the GIC powder prior to liquid mixing. Chemical characterization was performed by XRF. While, physical characterization was done by measuring film thickness and initial setting time. The compressive strength, surface microhardness, solubility, and antimicrobial effect against Streptococcus mutans bacteria using an agar diffusion test were measured. The data was statistically analyzed using independent sample t-tests to compare mean values of compressive strength, surface microhardness, solubility, and antimicrobial activity (p ≤ 0.05). RESULTS: The results revealed that innovative reinforced GIC with 0.01 wt.% Ag doped CNT fillers showed higher mean compressive strength, surface microhardness, and antimicrobial effect values than the conventional GIC control group; there was no significant difference between different groups in relation to the solubility test (P ≤ 0.05). CONCLUSION: The innovatively reinforced GIC with 0.01 wt.% Ag doped CNT fillers had the opportunity to be used as an alternative to conventional GIC dental cements.

Efficacy of bioactive materials in preventing Streptococcus mutans-induced caries on enamel and dentine.

The study investigated the ability of bioactive materials used to restore enamel and dentine specimens to prevent caries. Enamel (n = 50) and dentine (n = 50) specimens were obtained from bovine incisors, prepared, and randomly allocated to one of five groups according to the restorative treatment: alkasite without adhesive system; alkasite with adhesive system; high viscosity glass ionomer cement; resin composite; no restoration; negative control group. Specimens were restored, exposed to a thermal cycling aging protocol, sterilized, and exposed to a cariogenic challenge induced by Streptococcus mutans and then submitted to surface and subsurface microhardness tests and polarized light microscopy to verify the caries lesion development in enamel or dentine surrounding the restorative materials. Data were analyzed using one-way ANOVA. In enamel and dentine, glass ionomer cement, alkasite without and with adhesive system presented a lower percentage surface microhardness loss than resin composite and negative control. Enamel subsurface microhardness presented no statistically significant differences between glass ionomer cement, alkasite without and with adhesive system. Glass ionomer cement also did not present statistically significant differences from resin composite and the negative control. In dentine, glass ionomer cement showed the highest subsurface microhardness values. In conclusion, bioactive restorative materials provide greater protection to enamel and dentine against surface caries development than resin composite.

The potential of conventional and bulk-fill bioactive composites to inhibit the development of caries lesions around restorations.

PURPOSE: To determine caries inhibition potential of conventional and bulk-fill bioactive composites around restorations. METHODS: Enamel and dentin blocks were prepared using a diamond saw under water irrigation, finished (SiC, 600- and 800-grit) and polished (SiC 1,200, final polish= 0.2 µm). Blocks were then selected through enamel surface microhardness, and enamel and dentin standard cavities were restored (n=10/group) with conventional bioactive composite (Beautifil II, BTF), bulk-fill bioactive composite (Activa BioACTIVE, ACT), glass-ionomer cement (Ionofil Plus, ION), conventional composite (GrandioSO, GSO), and bulk-fill composite (Admira Fusion X-TRA, ADM). Afterwards, the blocks were subjected to pH cycling: 4 hours in demineralization and 20 hours in remineralization solutions for 7 days, before being cut in the middle. One half was used to calculate the carious lesion area (ΔS) using values obtained by cross-sectional microhardness (CSMH) testing. The other half was submitted to polarized light microscopy (PLM) and scanning electron microscopy (SEM). The % of internal gap formation (GAP) of restorations' replicas were analyzed under SEM. Data were analyzed by ANOVA and Tukey test (α= 5%). RESULTS: In terms of CSMH, ION group exhibited the lowest ΔS values, with no significant difference to ADM. The composites BTF and ACT were similar to each other (P< 0.05) and to their negative controls (GSO and ADM), respectively. ION showed lower caries formation under PLM, whereas the GSO group presented a greater demineralized area. ION presented the highest % of internal GAP formation. Bioactive composites (BTF and ACT) were similar to their corresponding conventional ones (GSO and ADM) in terms of GAP formation. CLINICAL SIGNIFICANCE: The glass-ionomer cement was more effective in inhibiting the formation of caries lesions around restorations. Because of the glass-ionomer cement's limited application in high load-bearing areas, the conventional bioactive composite would be a promising clinical choice.

Antibiofilm and mechanical properties of silver nanowire-modified glass ionomer cement.

BACKGROUND: Glass ionomer cement (GIC) is a commonly used restorative material in dentistry, but GIC does not have significant antibiofilm effects and its mechanical strength is limited. OBJECTIVE: To investigate the antibiofilm and mechanical properties of a newly developed silver nanowire (AgNW) modified GIC. METHODS: GICs were modified with different nanosilver formulations including 0.05%wt AgNW, 0.5%wt AgNW, 0.05%wt silver nanoparticle (AgNP) and 0.5%wt AgNP. Biofilms of Streptococcus mutans were cultured for 72 h on GIC specimens. Scanning electron microscopy (SEM) was conducted to observe the accumulation and morphology of Streptococcus mutans on the material surfaces. Another set of biofilm/specimens was treated with SYTO-9 and the biofilm development was evaluated by quantifying the visible stain with an inverted fluorescence microscope. The compressive strength of the specimens was assessed according to ISO 9917-1:2007. The colour of GICs was compared using the VITA Easyshade system. RESULTS: SEM images showed that fewer biofilms were accumulated on nanosilver-modified GICs. The Streptococcus mutans quantity was significantly lower in all nanosilver-modified groups compared to conventional GIC (p<0.0001). GIC modified with 0.5% AgNP showed slightly lower compressive strength than the negative control (58.3 ± 12.9 MPa vs 78.3 ± 13.8 MPa); but there is no significant difference between all study groups. The colour change between AgNW-modified GIC and conventional GIC was significantly lower than that between AgNP-modified GIC and conventional GIC. CONCLUSION: AgNW-modified GIC showed superior antibiofilm effect and comparable compressive strength to conventional GIC. In addition, the complement of AgNW would not influence the colour stability of GIC as much as AgNP. CLINICAL SIGNIFICANCE: This study developed a novel AgNW-modified GIC material. It showed good antibiofilm and mechanical properties and would not influence the colour stability of GIC. The AgNW-modified GIC has a large potential for clinical use and biomedical application.

Evaluation of the clinical impact and In Vitro antibacterial activities of two bioactive restoratives against S. mutans ATCC 25175 in class II carious restorations.

Background: Streptococcus mutans is a Gram-positive opportunistic bacterial pathogen and that causes dental caries and then restorative treatment remains the best clinical practice approach to repair and prevent dental caries. Aims: This study compared the antimicrobial performance of resin modified glass ionomer cement (RM-GIC) and ACTIVA restoratives by evaluating the S. mutans count, pH levels, and plaque index (PI) scores before and on the 7th day of restoration, and then determined the antimicrobial activities against S. mutans ATCC 25175 in both restoratives in vitro. Materials and Methods: Seventy-eight eligible Saudi female participants, with class II carious lesions, were randomly distributed into RM-GIC and ACTIVA restorative groups. We evaluated the S. mutans count by the serial dilution technique and salivary pH by using a portable pH meter. The PI scores were determined by Silness-Löe method and the antibacterial activity by the agar well diffusion method. Statistical analysis of normality distribution was performed with the Kolmogorov-Smirnov and the difference between groups was an analysis by paired t-test. In addition, the independent sample was compared with the independent samples t-test. Results: Both groups reduced the S. mutans count, pH acidity, and PI scores, and this reduction was statistically significant on the 7th day of restoration (P < 0.05), preference for ACTIVA. The in vitro antibacterial activity against S. mutans ATCC 25175 showed a non-significant difference between both bioactive restorative materials (P < 0.05). Conclusion: The novel application of ACTIVA restorative material is a promising option for patients at risk of caries.

Effect of aging on mechanical and antibacterial properties of fluorinated graphene reinforced glass ionomer: In vitro study.

OBJECTIVES: This study: 1) aims to test the mechanical and antibacterial properties of fluorinated graphene strengthened glass ionomer materials (FG/GICs); 2) aims to investigate the effects of thermo-cycling on (FG/GICs). MATERIALS AND METHODS: Fluorinated graphene (FG) with bright white color was prepared from fluorinated graphite (SIGMA Aldrich), using modified Hummer's method, to be added to conventional glass ionomer cements (GICs). In addition to a control group (group 1), experimentally modified GICs were prepared by adding FG to the conventional glass ionomer powder with three different weight ratios; (group 2, 1 wt %; group 3, 2.5 wt %; and group 4, 5 wt %) using mechanical blending method. Experimental groups of the specimens (n = 240) were divided, for each concentration (n = 120) half of the specimens were subjected to thermo-cycling. Hardness, compressive strength, and antibacterial activity of (FG/GICs) were measured with and without thermo-cycling. Compressive strength was measured by a universal testing machine, hardness was measured using a Vickers micro-hardness tester, and antibacterial effects against staphylococcus aureus and streptococcus mutans were tested by the pellicle sticking method. For statistical analysis, numerical data were explored for normality and variance homogeneity using Shapiro-Wilk and Leven's tests respectively. RESULTS: The prepared (FG/GICs) showed an increase in hardness in group 4 (p < 0.001). Groups 3 and 4 gave the highest compressive strength values with no significant difference between them (p < 0.001). Groups 2, 3, and 4 showed improved antibacterial activity with no statistical difference between them (p > 0.001). Results after thermo-cycling showed significantly decreased hardness, and compressive strength values (p < 0.001), however, the results of antibacterial activity against streptococcus mutans showed no statistical difference after thermo-cycling (group 2, p = 0.05; group 3, p = 0.18; group 4, p = 0.26). The same results were observed for antibacterial activity against staphylococcus aureus (p = 0.92, p = 0.14, and p = 0.48 respectively). CONCLUSION: FG can be considered a promising additive to GICs to promote its anti-cariogenic effects, however, these antibacterial effects are only useful in the short term, as aging adversely affected their mechanical properties. The 2.5 wt % FG/GICs is suggested to be the most encouraging, as after aging, it represented the highest compressive strength among all groups, while its hardness values were at least comparable to that of conventional glass ionomer. CLINICAL SIGNIFICANCE: FG/GICs can be considered an anti-cariogenic restoration in temporary restorative interventions, as in certain cases in deciduous teeth where considerable esthetics may be required, especially those with difficult moisture control, where neither resin composite restorations nor amalgam restorations will be indicated. It can also be used for patients with high caries index or in atraumatic restorative treatment (ART) in low-income countries.

Antibacterial effects of surface pre-reacted glass-ionomer (S-PRG) filler eluate on polymicrobial biofilms.

PURPOSE: To analyze the effects of surface pre-reacted glass-ionomer (S-PRG) filler eluate on polymicrobial biofilm metabolism and live bacterial count. METHODS: Biofilm was formed using glass disks 12 mm in diameter and 150 µm in thickness. Stimulated saliva was diluted 50-fold with buffered McBain 2005 and cultured in anaerobic conditions at 37°C for 24 hours in anaerobic conditions (10% CO2, 10% H2, 80% N2) to form the biofilm on the glass disks. Following this, biofilms were treated with (1) sterilized deionized water (control), (2) 0.2% chlorhexidine digluconate (0.2CX), (3) S-PRG eluate diluted to 10% (10% S-PRG)，(4) 20% S-PRG，(5) 40% S-PRG，(6) 80% S-PRG，and (7) S-PRG for 15 minutes (n= 10 per group), and samples were subdivided into two groups for measuring live bacterial count immediately after treatment and after 48 hours of culturing after treatment. The pH of the spent medium collected at the time of culture medium exchange was tested. RESULTS: Immediately after treatment, the live bacterial count of samples treated with drug solutions was significantly lower than the control (8.2 × 108), and the counts of samples treated with 0.2CX (1.3 × 107) and S-PRG (1.4 × 107) were significantly lower than those treated with diluted S-PRG (4.4 × 107-1.4 x 108). When the medium was measured again after culturing for 48 hours, growth was continually inhibited in all treatment groups and the bacterial count of samples treated with S-PRG (9.2 x 107) was significantly lower than that of samples treated with 0.2CX (1.8 × 108). The pH of spent medium immediately after treatment was significantly higher in groups treated with drug solutions (5.5-6.8) than the controls (4.2), and it was highest in the S-PRG-treated group (6.8). Thereafter, when culturing was continued for 48 hours, the pH of all treated groups decreased; however, the pH of the S-PRG-treated group was significantly higher than groups treated with other drug solutions. CLINICAL SIGNIFICANCE: Surface pre-reacted glass-ionomer (S-PRG) filler eluate not only reduced the live bacterial count of polymicrobial biofilm, but also continuously inhibited the lowering of pH.

A novel glass ionomer cement with silver zeolite for restorative dentistry.

OBJECTIVE: To develop an antimicrobial silver zeolite glass ionomer cement (SZ-GIC) and determine its biocompatibility, physical, adhesive and antibacterial properties. METHODS: Silver nitrate and sodium zeolite were used to synthesize silver zeolite (SZ). SZ-GICs were prepared by incorporating SZ into GIC at 5% (SZ-GIC5), 2% (SZ-GIC2), or 1% (SZ-GIC1) by weight, respectively. The SZ-GICs were characterized by evaluating surface morphology, topography and elemental composition. SZ-GICs' biocompatibility was assessed by evaluating cell cytotoxicity. Their physical properties were determined by testing setting time, compressive strength, flexural strength, water sorption and solubility. Their adhesive property was assessed by evaluating micro-tensile bond strength. Their antibacterial properties were assessed by evaluating biofilm growth kinetic, metabolic activity, viability and morphology. GIC was used as a control. RESULTS: SZ was a three-dimensional crystalline mineral. SZ-GICs (including SZ-GIC 5, 2 and 1) showed similar surface morphology and topography to GIC. SZ-GIC1 and GIC had no difference in cell cytotoxicity (p>0.05). SZ-GICs and GIC showed no difference in setting time (p>0.05). SZ-GICs had higher compressive and flexural strength than GIC (p<0.05). SZ-GIC2 and SZ-GIC1 showed lower water sorption and solubility than GIC (p<0.05). SZ-GICs had higher micro-tensile bond strength than GIC (p<0.05). Biofilms on SZ-GICs' surfaces showed lower colony-forming units, decreased metabolic activities, higher percentages of dead cells and more ruptured bacterial cells compared with those on GIC. CONCLUSION: SZ-GIC with silver zeolite at 1% by weight are as biocompatible as conventional GIC. The SZ-GICs have enhanced physical, adhesive and antibacterial properties than GIC. CLINICAL SIGNIFICANCE: A silver zeolite glass ionomer cement was developed. The SZ-GICs have great potential for caries prevention and management.

Three-Dimensional Assessment of Radiographic Changes after Indirect Pulp Capping Using Silver Diamine Fluoride with or without Potassium Iodide in Young Permanent Teeth (12-Month RCT).

The aim of this study was to conduct a three-dimensional (3D) evaluation of radiographic changes after indirect pulp capping (IPC) with silver diamine fluoride (SDF) with or without potassium iodide (KI) and resin-modified glass ionomer cement (RMGIC) in deep carious young permanent molars using cone-beam computed tomography (CBCT). 108 first permanent molars with deep occlusal cavitated caries lesions, in forty-nine 6- to 9-year-old children, were randomly allocated to one of 3 groups (n = 36) and treated with SDF+KI, SDF, and RMGIC as IPC materials. CBCT scans were taken at 0 and 12 months to assess tertiary dentin formation (volume and grey level intensity), increase in root length, and pathological changes such as secondary caries, periapical radiolucency, internal resorption, and obliteration of the pulp. The 3D image analysis procedures were performed using ITK-SNAP and 3D Slicer CMF. Comparisons were made using analysis of variance with a fixed effect for treatment and random effects for patient and patient-by-treatment to account for within-patient correlations. A two-sided 5% significance level was used. There were no significant differences among the three groups regarding tertiary dentin volume (p = 0.712) and grey level intensity (p = 0.660), increase in root length (p = 0.365), prevention of secondary caries (p = 0.63), and periapical radiolucency (p = 0.80) in the analysed 69 CBCT scans. The study did not find differences among the groups regarding quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure as shown by CBCT. Clinical Significance: The results show no significant differences in radiographic outcomes (quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure) when using SDF+KI, SDF, and RMGIC in IPC. The results of this study can help guide treatment decision-making regarding use of SDF and SDF+KI as IPC materials in deep cavitated lesions.

Time-dependent structural changes and hypermineralisation of artificially demineralised dentine following treatment with silver diammine fluoride and glass ionomer cement.

OBJECTIVES: This study aimed to evaluate the change of mineral content in dentine lesions over time and examine the effectiveness of the combined treatment with silver diammine fluoride (SDF) and glass ionomer cement (GIC). METHODS: Sixty bovine dentine specimens were divided into 4 groups: cont, Fuji, Safo, and Safo+Fuji. The specimens were imaged and measured using microcomputed tomography (microCT) at 7 time points: pre-demineralisation, after demineralisation for two weeks, immediately after treatment, 1 week, 2 weeks, 1 month, and 3 months after treatment. The 3-month group was evaluated with a light microscope, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and scanning electron microscope (SEM)/energy-dispersive X-ray spectroscopy (EDS). Data were analysed by Dunn's test and Wilcoxon signed rank test with Bonferroni correction for microCT, and Kruskal-Wallis test and two-way analysis of variance for EDS characterisation. RESULTS: MicroCT images showed high mineral density beneath dentine lesions in Safo+Fuji. The mineral density at 600 µm in Safo+Fuji increased significantly over time, while Safo showed an opposite trend (adjusted p<0.005). In Safo+Fuji, EDS revealed significantly high energy of fluorine (p<0.05, at 300 µm) and a tendency towards high energy of calcium (p>0.05). However, Safo+Fuji showed lower energy of silver compared to Safo (p<0.001). ATR-FTIR revealed that phosphate groups had the highest peak at a depth between 300 and 400 µm in Safo+Fuji. CONCLUSIONS: Safo+Fuji was effective in remineralising the deep lesion in dentine after one and three months, and a hypermineralisation zone generated beneath the lesion demonstrated additional benefit in this study. CLINICAL SIGNIFICANCE: This long-term in vitro study showed that SDF+GIC treatment could strengthen the structure of decayed teeth when applied in the treatment of patients with advanced rampant caries.

Effects of a co-stimulation with S-PRG filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase-1 production by human dental pulp fibroblast-like cells.

The present study investigated the effects of a co-stimulation with surface reaction-type pre-reacted glass-ionomer (S-PRG) filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase (MMP)-1 production by human dental pulp fibroblast-like cells (hDPFs). S-PRG filler eluate contains 6 ions (F, Na, Al, B, Sr, and Si) released from S-PRG filler. Each S-PRG filler eluate and MDP stimulation enhanced MMP-1 production by hDPFs. The co-stimulation with S-PRG filler eluate and MDP enhanced MMP-1 production more than the MDP stimulation alone. A similar stimulation induced the phosphorylation of ERK 1/2. The increased secretion of MMP-1 and enhanced phosphorylation of ERK 1/2 by the co-stimulation with S-PRG filler eluate and MDP were suppressed by the selective and potent CaSR antagonist NPS 2143. Since strontium binds to CaSR, these results suggest that the enhanced production of MMP-1 by the co-stimulation with S-PRG filler eluate and MDP was due to the effects of strontium.

Comparison of Antibacterial Activity, Cytotoxicity, and Fluoride Release of Glass Ionomer Restorative Dental Cements in Dentistry.

BACKGROUND This study aimed to compare the antibacterial activity, cytotoxicity, and fluoride release of 4 different glass ionomer cements (GIC). MATERIAL AND METHODS A total of 200 samples were prepared: Riva Silver, a silver-reinforced GIC; Equia Forte HT, a glass hybrid GIC; ChemFil Rock, a zinc-added GIC; and Ketac™ Molar Easymix. Using the agar diffusion test for antibacterial activity, 30 samples from each group were analyzed for Streptococcus mutans, Lactobacillus acidophilus, and Actinomyces naeslundii. The areas around the samples where no bacterial growth occurred were digitally measured and recorded. For cytotoxicity analysis, the WST-1 test was performed on 10 samples from each group using the L929 mouse fibroblast cell line. The fluoride release property was evaluated using an ion-selective electrode method on 10 samples from each group. RESULTS The group that used Ketac™ Molar Easymix showed the lowest antibacterial activity against S. mutans, L. acidophilus, and A. naeslundii. In all 3 days of cytotoxicity testing, the group that used Riva Silver was found to be the least toxic material, while the group that used ChemFil Rock did not have viable cells after the 1st day. In all 4 materials, fluoride release values gradually increased since the first day, with Ketac™ Molar Easymix having the highest fluoride release. CONCLUSIONS Of all the GICs tested, Ketac™ Molar Easymix demonstrated the least antibacterial activity despite having the highest fluoride release, while Riva Silver was found to be the least cytotoxic material.

Impact of surface pre-reacted glass ionomer filler eluate on lipase gene expression in Candida albicans: An in vitro study.

Although a surface pre-reacted glass ionomer (S-PRG) exerts a suppressive effect on Candida albicans (C. albicans) activity and growth, its influence on the expression of the lipase gene (LIP) family including LIP1-LIP10, an indicator of clinical infection, has not yet been investigated. Therefore, in this study, we evaluated the effect of S-PRG filler eluates on LIP expression in C. albicans using real-time reverse-transcription polymerase chain reaction. Candida albicans was treated with an S-PRG filler diluted at ratios of 1:32 and 1:64 for 24 h at 37°C. The diluted S-PRG filler eluates (1:32) suppressed lipase activity in C. albicans by downregulating LIP5 (0.54±0.25 relative to that of the control) and LIP8 (0.35±0.074) expression after 24 h, which corresponded with decreased lipase activity. At a dilution factor of 1:64, there was no significant difference in LIP expression. Thus, the S-PRG filler eluate has potential to suppress fungal activity by downregulating LIP expression.

Modification of glass-ionomer cement properties by quaternized chitosan-coated nanoparticles.

Glass ionomers (GICs), because of their qualities, are in a good position to be modified to resist masticatory stresses as permanent posterior restoration and prevent recurrent caries. The purpose of the present study was to evaluate the effect of adding quaternized chitosan-coated mesoporous silica nanoparticles (HTCC@MSNs) to conventional GIC on its mechanical properties, antimicrobial activity and fluoride release and the effect of 1- and 3-month water aging on the studied properties. HTCC@MSNs was synthesized, added to commercially available conventional GIC at 1%, 3%, and 5% by weight forming three experimental groups and compared with plain GIC as a control group. Flexural strength, modulus, Vickers microhardness and wear volumes were evaluated. Antibacterial activity was tested against Streptococcus mutans and fluoride release in de-ionized water was measured. All properties were evaluated before and after one- and three-month aging (n = 10 specimens per test/per time). Two-way ANOVA was used for statistical analysis. Characterization confirmed successful preparation of HTCC@MSNs. The flexural strength, modulus, hardness and wear resistance of the GICs improved significantly by adding 1-3% HTCC@MSNs, while 5% HTCC@MSNs group showed no significant difference compared to control group. Bacterial inhibition zones and fluoride release increased proportionally to the amount of filler added. Mechanical properties were improved by artificial aging. Fluoride release values, and bacterial inhibition zones decreased with aging for all groups. HTCC@MSNs as a filler with the optimized proportion provides strengthening and antibacterial effect. In addition, aging is an important factor to be considered in evaluating experimental fillers.